EN - 12
A
B C
C
D
E
2.2 Electrical Connection and Safety
WARNING:
The electrical connection
of this appliance should be carried out
by an licensed electrician, according
to the instructions in this guide and in
compliance with the current local
regulations.
WARNING: THE APPLIANCE MUST
BWARNING: THE APPLIANCE
MUST BE EARTHED.
• Before connecting the appliance to the
power supply, the voltage rating of the
appliance (stamped on the appliance
identification plate) must be checked for
correspondence to the available mains
supply voltage, and the mains electric
wiring should be capable of handling the
appliance’s power rating (also indicated
on the identification plate).
• During installation, please ensure
that insulated cables are used. An
incorrect connection could damage
your appliance. If the mains cable is
damaged and needs to be replaced
this should be done by a qualified
personnel.
• Do not use adaptors, multiple sockets
and/or extension leads.
• The supply cord should be kept away
from hot parts of the appliance and must
not be bent or compressed. Otherwise
the cord may be damaged, causing a
short circuit.
• A double pole disconnector (with at least
3 mm contact spacing) must be used in
order to meet the safety regulations.
• The appliance is designed for a power
supply of 220-240 V~. If your supply is
different, contact the authorized service
personnel or qualified electrician.
• Ensure all connections are adequately
tightened.
• Fix the supply cable in the cable clamp
and then close the cover.
• The terminal box connection is placed on
the terminal box.
• Green/Yelllow (Earth) wire to the
terminal marked "PE".
• Brown (Active) wire to the terminal
marked "L".
• Blue (Neutral) wire to the terminal
marked 'N"
4
4
N
N
PE
PE
L2
L3
L1
L
5
5
3
3
2
2
1
1