Bellfires Smart Bell 70 PF, Инструкция по установке и руководство по обслуживанию, Страница: 24 / 68

24
Bell
fi res
English
Installation instructions
2.1.1 Fitting into a new chimney
The fi replace must be mounted on a concrete fl oor. If there is no concrete fl oor, it is
essential to re-enforce the fl oorboards underneath with concrete. Build in the fi re insert
up to the top of the fi replace opening. Push the appliance into the opening and make
the chimney connection.
Connect the gas supply using the separately provided gas inlet connector. Ensure that
the gas regulating block is straight during the connection. Ensure that the gas regulating
block and pipework are not put under stress.
Make the electrical connection.
During subsequent installation, protect the gas piping against encasement by cement etc.
Important: Cement and chalk can damage
the gas piping and can, in turn,
lead to gas leaks.
The appliance can now be built in.
First determine the places for the ventilation ducts (grates, at the top and bottom of the
fi replace).
The appliance can be built in using brickwork or by means of fi re-resistant plates that
are screwed to a metal frame. You can, if you like, erect a natural stone mantelpiece in
front of this.
If desired, the frame can be removed temporarily, during the installation of the appliance.
First remove the door (including glass); see paragraph 5.1.
Then loosen the 3 Allen bolts on the inside of the top frame and the 2 Allen bolts at the
bottom left and bottom right respectively a couple of turns. Take the frame forwards and
remove. When the installation is completely fi nished one can place back the frame.
Make sure that the Allen bolts are securely turned
Allen bolts