Bellfires Smart Bell 65/55 MF Скачать руководство пользователя страница 7

Страница: 7 / 48

Requirements

4.1

Requirements on the location

• Never use combustible building materials for the fireplace.
• Do not install the appliance against a flammable rear wall.
• Install a nonflammable insulation plate of at least 12 mm between the appliance and

the rear wall. The insulation plate must cover the entire area of the rear of the

appliance.

• The appliance must be installed approximately 2 cm from the rear wall.
• If the fire burns in the appliance, make sure that the floor temperatures below and in

front of the appliance cannot be higher than 85 °C .

• Make sure that the room where the appliance is installed is properly ventilated.

4.2

Other requirements

• The gas supply connection is located under in the appliance for an easy connection to

all directions.

• Only use gas piping of at least 1/2" and a shut-off valve to connect the gas supply to

the gas regulator block of the appliance.

• Make sure that there is a wall socket with earth connection nearby the appliance. The

socket must be accessible at all times. The powercable (+ 0.5 m) is coming from the

rear of the appliance.

• Install the fireplace on a solid floor that can bear the weight of the appliance and the

fireplace.

• If the floor is made of flammable material, take correct safety measures. Install a

temperature protection plate made of nonflammable material between the appliance

and the floor.

• The appliance must be installed into an existing open fireplace or as a built-in

appliance in a new fireplace.

• If the concentric flue system is installed in a chimney that is used for wood or coal fire,

clean the chimney.

• If you built a new fireplace, make sure that it is ventilated with vents at the bottom and

top of the fireplace. If the fireplace is not ventilated the temperature of the appliance

can increase to dangerous temperatures and damage the fireplace.

• Keep a minimum distance between the appliance and a front wooden ﬁreplace

surround; with a depth of less than 10 cm, of:
• 5 cm on the sides: (minimum distance: side appliance - leg wooden ﬁreplace

surround)

• 40 cm at the top: (minimum distance: top appliance - bottom of beam wooden

ﬁreplace surround) The temperature on the underside of the beam of the wooden

ﬁreplace must never exceed 85°C. Optional: insulate the bottom of the wooden

beam with a ﬁreproof plate.

4.3

Requirements on the outlet

4.3.1

Requirements on the roof outlet

Make sure that the outlet is installed at least 0.5 meter from the edge of the roof.

Note:
All the minimum distances are guidelines. Consult your national and local

directives for the exact minimum distances.

Requirements

Smart Bell 65-55

Содержание Smart Bell 65/55 MF

















































Результаты поиска

Содержание Smart Bell 65/55 MF

Отзывы:

Похожие инструкции для Smart Bell 65/55 MF

Бренды по названию

Популярные бренды

Bellfires Smart Bell 65/55 MF, Руководство по подготовке

Результаты поиска

Содержание Smart Bell 65/55 MF

Отзывы:

Похожие инструкции для Smart Bell 65/55 MF

Бренды по названию

Популярные бренды