Bellfires CBL3 L/R CF, Инструкция по использованию и ежедневному обслуживанию, Страница: 31 / 36

31
English
Instructions for use
• Clean the inside and the outside of the glass regularly. The frequency of cleaning
depends on the degree of contamination. Not cleaning the glass in time can cause it
to become dull and diffi cult, if not impossible, to clean.
• Always rub the pane completely dry: Water droplets (residual water) can leave marks
on the coating.
• Fingerprints are more visible on anti-refl ective glass: Wear (rubber) gloves when
gripping the pane.
• If the pane is lifted using a vacuum lifter, the rubber of the suction pad must be clean
and dry in order to avoid damaging the coating.
4.2 MAINTENANCE SPECIFICATIONS FOR ‘STANDARD’ GLASS
When the appliance is equipped with a pane of “ standard ” ceramic glass, one needs
for the cleaning the pane, to observe the following maintenance instructions.
• Regularly clean the glass on the inside of the appliance with glass cleaner or
ceramic hob cleaner.
• If the glass needs to be cleaned on the inside, it should be removed from the
appliance. Instructions for removing the glass can be found in Chapter 4.1 of the
“Installation Instructions & Maintenance Manual” booklet.
• Use a soft cloth / sponge / paper.
• A white haze can form on the glass during the appliance’s fi rst few burning hours.
Remove this haze immediately.
• Clean the inside and the outside of the glass regularly. The frequency of cleaning
depends on the degree of contamination. Not cleaning the glass in time can cause it
to become dull and diffi cult, if not impossible, to clean.
• Always rub the pane completely dry: Water droplets (residual water) can leave marks
on the glass.
• Fingerprints are visible on the glass: Wear gloves when gripping the pane.
• If the pane is lifted using a vacuum lifter, the rubber of the suction pad must be clean
and dry in order to avoid marks on the pane.