10
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
Hardware Used
4
5
4. Secure post (J) to cylinder housing (H) using the
reinforced ring (NN), M6 x 10 mm bolts (DD) and
Φ
6 small flat washers (EE). Fasten and cover
with the deck ring (OO).
6.
NN
EE
NN
Φ6 Small Flat Washer
x 4
x 1
Reinforced Ring
OO
x 1
Deck Ring
oo
G
G
F
J
J
H
E
E
J
F
6
D
DD
M6 x 10 mm Bolt
x 4
5. Slide fastening nut (G) down the post (J) with the
rounded side facing down. Next, slide the tighten-
ing spacer (F) down the post (J) with the smaller
side facing down. Put the table (E) on the post (J)
with the metallic side facing up.
Insert the screw coupler (D) on the post (J),
inserting it through the middle of the table (E) on
the post (J).Thread the tightening spacer (F) on
the bottom of the table (E) counterclockwise
onto the screw coupler (D). Tighten securely to
hold the table (E) to the screwcoupler (D).
Thread the fastening nut (G) counterclockwise.
Tighten securely to lock in place.Loosen the
fastening nut (G) to adjust the position of the
table (E) on the post (J).
ASSEMBLY INSTRUCTIONS
