Bellelli B-FIX, Руководство пользователя

Страница: 17 / 44

17
The child must have enough leg room while riding.
The cyclist must have enough space to comfortably drive and steer.
Make sure that the knee does not hit against the seat while riding.
Make sure that the handlebars do not jam in the seat while steering.
Tighten the nuts (8) on the mounting support, once you have determined the best location for the
seat.
WARNING: Check to make sure that tightened nuts completely cover the threads (fig. E). If this is
not the case, the mounting support is not properly attached.
Attach the cover (1) by pushing against the front of the mounting support so that it locks into place
on the sides of the mounting support where the corresponding notches are located. For a correctly
positioned cover, make sure that the rectangular indentation is directed upward. A click shows a
successful mounting.
The correct choice of the components, in particular the screws ensures that the they do not emerge
from the cover. Lock the mounting support by turning the key to the “closed” position (Fig. F).
WARNING: Check the tightening of the screw regularly. These can come loose during use.
Removing the Seat from the Bike
Place the security system / Burglar in the open position.
Press and hold the button (6) on the mounting support (17) and pull the seat upwards (fig. N).
Installing the Footrests
Take the left footrest (25) (L symbol printed on the back).
Insert it into the vertical slot of the left leg strap.
Push it all the way up (fig. O).
Take the catch lever (23) of the left footrest (L symbol printed on the back).
Insert the catch lever into the hole on the backside of the footrest. insert it from the outside and push
it all the way through to the back (fig. P).
Close the locking lever by pushing it down until you hear a click (fig. Q).
Repeat the same operations for the right footrest (symbol R).
USE AND ADJUSTMENT OF THE SEAT
Adjusting the footrests
Prior to the use of the seat, check that the child’s feet rest fully on the supports (25).
WARNING: Do not install the footrests with the child in the seat.
Turn the catch lever on the rear of the footrest upwards (fig. R).
Adjust the footrest (25) upwards or downwards until you reach the desired position.
Push the lever downwards to lock it. A click indicates that the lever is correctly locked in.
Final Inspection
WARNING: Do not conduct the final inspection with the child in the seat.
Push the bike for a few meters by hand, making sure that no moving parts touch the seat, no protru-
ding straps are close to the wheels and brakes and that pedals are still in good condition.
EN EN