Belle Group Premier XT, Руководство оператора

Страница: 13 / 32

13
Check the fuel & lubricating oil levels 9
Check for oil & fuel leaks 9
Clean, or replace, the air cleaner element under very dusty conditions 9
Check the condition of the battery, if fi tted 9
Clean or replace the air cleaner element under moderately dusty conditions 9
Drain the sump and refi ll with new oil of the correct type and specifi cation as given in 9 9
engine handbook
Clean or replace the injectors if the exhaust is dirty
9
Renew the fuel fi lter element if the fuel being used is not perfectly clean
9
Replace the air cleaner element
9
Examine exhaust & induction systems for leaks, damage or restrictions
9
Renew the fuel fi lter element
9
Check the battery charge winding system; refer to Workshop Manual
9
Check the valve clearances
9
Decarbonise if the engine performance has deteriorated
9
Clean the cylinder barrel and head fi ns
9
Clean the banjo union at the cylinder head end of oil feed pipe
9
Drain, fl ush and refi ll the fuel tank
9
Daily
Every 125 Hrs
Every 2000
Hrs
Every 1000
Hrs
Every 500 Hrs Every 250 Hrs
To help assist engine running-in, all engines are despatched with an initial fi ll lubricating
oil which must be changed after 100 hours.
All subsequent oil changes must be as specifi ed below.
Lister-Petter 32 & 10 Engines
Checks and Maintenance GB
Mixer Daily 50 250 500 1000
Hours Hours Hours Hours
Grease Yoke Pivot 9
Grease Tipping Gear (10 Operations of Grease Gun) 9
Remove Drum and Grease Shaft 9
Check Nuts and Bolts
9
Check Gearbox Oil
9 9
Grease Layshaft, Grease Nipple
9
Check Components for Leaks
9