BELLAGIO LT 2033, Руководство пользователя

Страница: 3 / 29

2
Important Safety Instructions Continued
Cabinet Slots
NEVER push objects or any kind into the unit through the cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock.
NEVER spill liquid of any kind on the product.
Ventilation
DO NOT block any ventilation openings. Install in accordance with manufacture's
instructions. Slots and openings in the cabinet and the back and bottom are provided for
ventilation, and to ensure reliable operation of the product and to protect it from Overheating.
These openings must NOT be blocked or covered. There should be at least 10cm of space
from these openings. The openings should never be blocked by placing the unit on a bed,
rug or other similar surface. This product should NOT be placed in a built-in installation such
as a bookcase unless proper ventilation is provided.
Grounding or Polarization
This product may be equipped with a polarized alternating current line plug (a plug having
one blade wider then the other). This plug will fit the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete
outlet. DO NOT defeat the safety purpose of the polarized plug.
Power - Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched
by items placed upon or against them. Pay particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the product.
UL Safety Remark AC Adaptor
This product is intended to be supplied by a listed power unit marked “class 2”, “Limited
Power Source” or “LPS” and output rated +12Vdc, and 5.0A or equivalent statement
provided in operating manual, if power unit is not provided with product.
Power Sources
This product should be operated only from the type of power source indicated on the rear
panel. If you are not sure of the type of power supply to your home consult your product
dealer or local power company.
Lightning
For added protection for this product during a lightning storm, or when it is left unattended
and unused for a long period of time, unplug it from the outlet and disconnect the antenna or
cable system. This will prevent damage to the product due to lightning and power-line
surges.
Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits, as contact with them might be fatal.
Overloading
DO NOT overload wall outlets, extension cords or integral convenience receptacles as this
can result in a risk of fire or electric shock.