4
OPERATION INSTRUCTION:
1) Making Coffee immediately
1) Open the reservoir cover of coffee maker; fill proper amount water into
reservoir with carafe. The water level should be between the MAX and MIN.
2) Place the funnel into the funnel support; make sure it is assembled
correctly. Then place the filter in the funnel correctly.
3) Add coffee ground into filter. Usually, one cup of brewed coffee requires
one scoop or spoon of ground coffee. You may adjust amounts according
to your taste, and to quality of the coffee used.
4) Insert the carafe on warming plate as shown in parts picture.
Note: the carafe must be placed on the warming plate properly for brewing
to proceed.
5) Plug the power cord into the outlet, the LCD will display “AM12:00” (fig.1).
6) Press “ON/OFF” button, the “RUN” indicator will be illuminated. The appliance will begin
working.
Note:
You can take out the carafe during brewing to pour and serve at any time. The coffee maker
will stop dripping automatically; however it is important that the brewing not be interrupted for
more than 30 seconds, as this could cause an over flow.
7) Do not open the tank cover when the coffee maker is operating. The flow of hot water will may
cause a burn and possibly damage the appliance.
8) You can take out the carafe, pour and serve when finish brewing (be sure to wait approximately
1 min after brewing has completed to prevent any drips falling on the warming plate..)
Note:
The brewed coffee will be less than the water you poured in the reservoir as some water is
absorbed by the ground coffee.
As a safety measure, you should always pour coffee with
the lid in place. This will also aid in keeping the coffee warm.
9) Always turn the coffee maker off and unplug the power cord from the electrical outlet when the
coffee maker is not in use.
Note:
Please pay attention when pouring the coffee. The temperature of freshly brewed coffee
is very hot and may cause burning.
RUN
AUTO
ON/OFF
PROG
HOUR
MIN
Fig.1
