6
Care & cleaning instructions
CAUTION:
Never immerse the motor base, plug or cord in water or any other liquid.
1. Always unplug the 10 speed blender before cleaning.
2. Whenever possible, simple rinse parts immediately after processing to make cleanup easier.
3. Always handle blades using the blade collar.
CAUTION:
Use extreme care when handling blades. Do not touch the blades with your fingers.
The blades are very sharp and can cause injury if touched.
4. For quick clean-ups, fill plastic jar one-quarter full with clean warm water. Press pulse several times
using several times. Rinse thoroughly.
5. Remove the lid after use to clean. Wash the lid and the plastic jar in warm soapy water.
Rinse and dry thoroughly.
CAUTION:
never use rough scouring pars or abrasive cleansers on any plastic or metal parts
as the surface may be damaged.
6. The plastic jar and lid are top-rack ONLY dishwasher safe.
IMPORTANT:
after dishwashing, always check to make sure the gasket seal on the lid is properly
in place as the heat from some dishwasher may cause to become loose.
7. The motor base may be wiped with a damp cloth or sponge. Dry thoroughly.
WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER.
8. Storage instructions:
a. Unplug and clean the unit.
b. Store in original box or in a clean, dry place.
c. Never store 10-speed blender while it is hot or plugged in. Never wrap cord tightly around
appliance. Never place any stress on cord, especially where the cord enters the unit, as this
could cause the cord to fray and break
