Bella 90078, Инструкция по эксплуатации

Страница: 12 / 24

12
Before Using for the First Time
CAUTION: To protect against electrical shock, do not immerse the Coffee Maker or allow power
cord to come into contact with water or other liquids.
1. Remove all packing material and labels from the inside and outside of the Coffee Maker.
Place the unit on a flat, clean surface.
2. Before preparing coffee, thoroughly clean the glass carafe with lid, removable filter holder
and permanent coffee filter in hot, sudsy water. Rinse and dry. Replace disassembled parts.
3. Clean the inside of the Coffee Maker by brewing 2 full carafes of tap water (see BREWING
COFFEE section for instructions). Do not add the permanent coffee filter or ground coffee for
this initial cleaning.
NOTE: At the end of the first cycle, allow 15 minutes for the unit to cool.
4. Brew a second carafe of fresh water.
5. Wait an additional 15 minutes to allow the unit to cool before brewing your first carafe
of coffee.
SETTING THE CURRENT TIME
NOTE:
You do not need to set the CURRENT time if you are not using the PROGRAM (future
brew) feature.
1. Plug the Coffee Maker into a 120V AC electrical wall outlet. The LCD display will
illuminate white.
NOTE:
By default, 12:00 AM will be displayed, and will be flashing.
2. Press the HOUR button to increase the hour. Once the desired hour is displayed, press the
MIN button to increase minutes until the CURRENT time is displayed. Press and hold HOUR
or MIN to toggle quickly.
NOTE: Pay attention to the AM and PM setting.
NOTE: The white backlit LCD display will advance to sleep mode within 15 seconds if no buttons
are pressed. The CURRENT time can be changed at any time by simply repeating Step #2.
IMPORTANT: If you unplug and re-plug the Coffee Maker it will reset to the default time.