24
Page 5
Parameters:
Keycode:
Activates the 4-digit keycode. After initial entry of your original keycode,
Command Mode will demand this keycode for each entry. This function serves to
protect the system from illegal manipulation of use settings.
The keycode function may only be activated, if a code has been entered as ‚New
Keycode‘ and if is has been stored. User commands: ENABLE / DISABLE.
New Keycode: Input or change of a 4 digit numerical Code.
In order to change the keycode the entry of the original keycode will
be necessary.
User commands:
YES / NO and 0 to 9.
Memorize and save your personal keycode. Any reset due to a lost or forgotten keycode
requires factory service at user‘s cost.
