Bell Excursion 35850 Скачать руководство пользователя страница 18

IMPORTANT:

 Subscription to Caller ID on Call Waiting services from your local phone 

company is required for using the Caller ID on Call Waiting features of the 35850.   Your new 
35850 telephone gives you the ultimate in cordless telephone sound quality with the luxury of 
Caller ID on Call Waiting.  
If this is your first cordless telephone, you will soon discover that your cordless is similar to 
regular telephones, except without the cord.  If you have owned a cordless in the past, you will 
discover that the 35850 telephone is the most powerful and full-functioned Caller ID on Call 
Waiting cordless telephone on the market, some key features are:

  40 name and number Caller ID on Call Waiting memory (Caller List)

20 name and number programmable memory (Phonebook)

Hearing aid compatibility

Frequency Hopping Digital Spread Spectrum radio communication technology

Unlike regular telephones, your cordless telephone does not work during power failures.  We 
do no recommend you to use a cordless telephone as the only phone in your residence.
 

INTRODUCTION TO CALLER ID ON CALL WAITING

The 35850 Caller ID on Call Waiting devices allow you to take advantage of the Caller 
Identification delivery service offered by your local telephone company. For more information, 
you can refer to the following Question and Answer table:

OUT OF RANGE WARNING 

The handset and base unit communicate up to a certain maximum range. The distance 
can be affected by weather, power lines, or even other cordless telephones.

If you far away from the base unit, the handset will show  "OUT OF RANGE” on the LCD 
display to warn you that bit error rate is too high for proper communication between the 
handset and the base unit.

When you hear no voice and see the "OUT OF RANGE" display, you should move closer 
to the base unit. Otherwise, the call will automatically cut off after 30 seconds.

 

 

LOW BATTERY WARNING

 

When the handset battery voltage level is low,  the handset LCD Display shows 

“BATTERY LOW!”.   

Return the handset on the base cradle or charge cradle for charging.

CALLER ID OPERATION

Caller ID is a device that identifies the calling party before you 
answer a call. This device can be used to screen unwanted 
calls and eliminate harassment from annoying calls.
CID on Call Waiting is a device that can also identifies that call 
waiting part before you answer a call.
When used with Caller ID on Call Waiting service, the Caller ID 
on Call Waiting device displays the name (if available) and the 
telephone number (if available) of the person calling before you 
answer your telephone.
Your local telephone company. However, not all local telephone 
companies provide Caller ID service. Please call you local 
phone company to confirm that the service is available before 
you install the device.
For your Caller ID unit to function, you must first arrange with 
your local telephone company to have Caller ID on Call Waiting 
service installed on your line. There is an extra charge added 
to your monthly telephone bill for this service. Before using this 
unit, please read this instruction manual carefully.

QUESTIONS

ANSWERS

What is Caller ID?

What is CID on Call Waiting?

How Does Caller ID on Call Waiting work?

Who provides Caller ID services? 

How Can I activate my Caller ID?  

17

05111A-1

Содержание Excursion 35850

























Отзывы: