3 |
P a g e
Getting Started
Powering On / Off and Standby mode
To turn on, press and hold the Power Button
(12)
for 3 seconds, the unit will emit 1 audio chirp and a
vibration. The Power Indicator
(4)
on front of the unit will turn on and remain solid green while the unit is
powered on, in stand-by. This indicator will turn off when the unit is powered off.
To turn off, hold the Power Button
(12)
for 3 seconds again to turn the camera off.
Activating Video Recording
To activate video recording with the unit powered on, press the Record Button
(8)
once. The unit will emit
1 audio chirp and 1 vibration with audio prompt (
Recording start
).
The Status Indicator LED (Red recording indicator flashing) and camera vibrate once.
To stop recording, press and hold Record Button
(8)
for 3 seconds, the camera vibrates twice and the
status indicator LED turns to solid green.
Note:
When the camera is powered off, hold the Record Button
(8)
for 3 seconds to power the camera on
and start video recording.
Taking Digital Photos
To take a photo, when the camera is in standby mode or recording video, press the Photo Button
(9)
located on the front left side of the device, under the Record button
(8)
. The unit will emit 1 audio chirp.
The Power Indicator Light
(4)
on the front of the unit will change to red momentarily to indicate that a photo
has been captured.
Activating Stealth Mode
Press the Snapshot Button
(9)
for
3 seconds to turn all visual and sound indicators off, both LED, LCD &
voice indication will be disabled. During Stealth Mode, only vibration is enabled. The camera recording
status will be indicated by vibration: one vibration upon recording start, two vibrations upon recording stop.
Turning WIFI On / Off
When the camera is in standby mode, press and hold the Fn Button
(11)
for
3 seconds to turn on WIFI. A
WIFI icon on the LCD display
(1)
will turn blue. To turn WIFI off, press and hold the Fn Button
(11)
for 3
seconds, and the WIFI icon will turn white.
Turning GPS On / Off
Connect the camera to the
Bell Falcon Setup Manager
PC software. For further details, please refer to
page
Error! Reference source not found.
Turning IR infrared night vision On / Off
Press the Fn Button
(11)
once to turn on IR, press again to turn IR off.