ISS 5, SECTION 502-612-410
Notes for Fig. 2:
I, THE 63SAOSC KEY IS SUPPLI EO
Ill
TH AN ADAPTER IN THE CUTOH KEY POS I T1 ON. THE SLATE
MOUNTING CORD PLUG CONNECTS TO THE ADAPTER. CONNECT (BL-Y) AND (Y-BL) ADAPTER LEADS TO
TERMINALS I AND 2, RESPECTIVELY, BALANCE OF PLUGS CONNECT DIRECTLY TO KEY.
2. IN SETS EQUIPPED \liTH A 658C KEY, THE (G) CONTACT STRIP LEAD
15
TERMINATED ON 17 AND
(R) ON 18. IF A 6S8C KEY IS ADDEO IN THE FIELD, LEADS MUST BE MOVED FROM PRECEDING
MODULE CHAINING CIRCUIT TO TERMINALS 17 AND 18.
3. PROVISIONS ARE MADE FOR MECHANICALLY STORING THE LIGHT BEIGE PLUG ON THE 6S8A KEY, NO
ELECTRICAL CONNECTION IS MADE,
4. \/HEN THE 658A KEY IS REQU I REO AS A DUAL PURPOSE KEY, REMOVE STRAP BETWEEN TERMINALS
I
7
AND I 8, USE M I
\1
CORD OR EQU !VALENT TO CONNECT TERMINAL I 7 TO A
0
ISS I MILAR GROUND
OR NONGROUNOEO CIRCUIT,
S. TO SUPPLY
"I"
HOLD FEATURE, TERMINATE (0-Y) MOUNTING CORD LEAD FROM FIRST MODULE ON
TERMINAL 24. LEAD BECOMES SP LEAD AT EQUIPMENT.
6. IF HOLD POSIT ION LAMP IS REQUIRED, CONNECT (G-Y) LAMP GROUND LEAD AND (Y-G) LAMP LEAD
TO (G-Y) AND (Y-G) MOUNTING CORD (BL BINDER) LEADS, RESPECTIVELY, USING SPARE
TERMINAL OR D-I 61488 CONNECTOR. LAMP MUST BE SEPARATELY ORDERED AND INSTALLED.
7, THESE CONTACT STRIPS ARE REQUIRED \/HEN TELEPHONE SET IS EQUIPPED \liTH THE DJ20K (MD)
OR THE 0200S (MD) MOUNTING CORD.
*
INSULATED AND STORED.
-t
DEAD DRESSED.
BSP
502-612-�10-i05_1976-04-0 .jpg 5canneo by Frank Harrell, (Cow5oy Frank) Castle Rock, Coloraao Oct 05, 2012 16:39:59
Page 5
