manualshive.com logo in svg

BELL LABS INNOVATIONS Lucent Technologies Access Security Gateway Guard, Руководство пользователя

Продукт BELL LABS INNOVATIONS Lucent Technologies Access Security Gateway Guard - это надежное устройство для обеспечения безопасности доступа. Пользователь может скачать бесплатный пользовательский мануал для данного продукта на manualshive.com. Поддерживается русский язык.

Поделиться
Скачать
background image

User Connectivity

142

11.5.3 View Session – VS Command

The VS command enables a sysop or CMaster level user to view, but not join in, a host session in
progress. After you type VS, you will be prompted for the number of the host port.  At the prompt,
enter the host port number. You may also enter the host port number as part of the command.
For example, to view a session with host port 3, type

>VS 3

Press any key to end the session.

11.5.4 Connect to Lucent Host – CONL Command

The Lucent Connect to Host command (CONL) allows a sysop or CMaster level user to access a
Lucent host device connected to an ASG Guard/ASG Guard Plus Host Port. The access can be
either from a remote terminal via a modem port, from a remote terminal through a PPP link or
Ethernet connection, or from a local terminal connected to the AUX Port.

Type CONL at the system prompt and press the ENTER key to display the Connect to Host
screen. You may also enter the host port number as part of the command. For example, to
connect to host port 3, type

>CONL 1 or >CONL H1

The ASG Guard/ASG Guard Plus will default to the host port if no alphabet indicator is used.

You can end the session by typing CTRL+E if your login port parameters have "Host Session
Disconnect on CTRL+E" set to Yes. Otherwise, you must break your connection to the ASG
Guard/ASG Guard Plus by either hanging up your modem or disconnecting your terminal from the
AUX Port.

11.5.5 Connect to Host – CON Command

The Connect to Host command (CON) allows a sysop or CMaster level user to access a host
connected to an ASG Guard/ASG Guard Plus Host Port or a modem port (internal or external).
The access can be either from a remote terminal via a modem port, from a remote terminal
through a PPP link or Ethernet connection, or from a local terminal connected to the AUX Port.   

Type CON at the system prompt and press the ENTER key to display the Connect to Host
screen. You may also enter the host port number as part of the command. For example, to
connect to host port 3, type

>CON 3 or >CON H3

The ASG Guard/ASG Guard Plus will default to the host port if no alphabet indicator is used.

You can end the session by typing Ctrl+A if your login port parameters have "Host Session
Disconnect on Ctrl+A" set to Yes. Otherwise, you must break your connection to the ASG
Guard/ASG Guard Plus by either hanging up your modem or disconnecting your terminal from the
AUX Port.

11.5.6 Disconnect – DIS Command

The Disconnect command disconnects an active call on the modem port if the command is issued
from a terminal connected to the ASG Guard/ASG Guard Plus via a modem port. If the command
is issued from a terminal connected to the AUX port, the session on the AUX port is terminated.

Type DIS at the system prompt and press the ENTER key. If you decide not to terminate the
communications session, press the SPACE BAR to toggle the field to No and then press the
ENTER key. If you are sure that you want to end this communications session, press the ENTER
key when Yes appears in this field.

Содержание Lucent Technologies Access Security Gateway Guard











































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Lucent Technologies Access Security Gateway Guard

B&B Electronics GW-7472 User Manual preview
GW-7472
Бренд: B&B Electronics Страницы: 60
Luminext RF4 Wirepas Installation Instruction preview
RF4 Wirepas
Бренд: Luminext Страницы: 8
MARCOM GW-DLMS-485-ELSA15 User Manual preview
GW-DLMS-485-ELSA15
Бренд: MARCOM Страницы: 13
SVS GW-12 Operating Instructions preview
GW-12
Бренд: SVS Страницы: 4
zapco SymbiLink SLN-4 Owner'S Manual preview
SymbiLink SLN-4
Бренд: zapco Страницы: 15
XiNCOM XC-DPG603 User Manual preview
XC-DPG603
Бренд: XiNCOM Страницы: 56
Ubee DDW366 Safety And Installation Manual preview
DDW366
Бренд: Ubee Страницы: 7
Gree TD GUD 30/01 Installation Manual preview
TD GUD 30/01
Бренд: Gree Страницы: 12
Cisco IOS Router Getting Started Manual preview
IOS Router
Бренд: Cisco Страницы: 12
Cisco DPC3940 User Manual preview
DPC3940
Бренд: Cisco Страницы: 59
Cisco DPC3829 User Manual preview
DPC3829
Бренд: Cisco Страницы: 56
Cisco IC3000 Product Documentation preview
IC3000
Бренд: Cisco Страницы: 12
Cisco Linksys AG310 User Manual preview
Linksys AG310
Бренд: Cisco Страницы: 88
Cisco Explorer 4250 User Manual preview
Explorer 4250
Бренд: Cisco Страницы: 16
Cisco LINKSYS AG241 User Manual preview
LINKSYS AG241
Бренд: Cisco Страницы: 41
Cisco IG21-EU-E-K9 Installation Manual preview
IG21-EU-E-K9
Бренд: Cisco Страницы: 18
Cisco EVM-IPVS-16A Connecting preview
EVM-IPVS-16A
Бренд: Cisco Страницы: 14
Cisco DPC3941T User Manual preview
DPC3941T
Бренд: Cisco Страницы: 80

Бренды по названию

Популярные бренды

Загрузить еще бренды