Powering BH65TWS On / Off
Press and Hold the POWER button for 4
seconds to power ON. You will hear an audible
tone. The blue LED will flash quickly to indicate
that it is powered on and searching for a
Bluetooth source to pair with
.
To power the speaker off, press and hold the
POWER button for 4 seconds.
NOTE:
An additional battery icon may appear
next to the Bluetooth icon at the top right of your
phone/tablet’s screen, indicating the speaker’s
battery level. This is compatible only with certain
devices.
Connecting BH65TWS via Bluetooth
Once powered on, the speaker will automatically
enter pairing mode. Go into your phone/tablet’s
Bluetooth settings and enable Bluetooth. Next,
enter the Bluetooth device list and select
Bell+Howell_BH65TWS
. After selected, wait a
few seconds for the pairing to complete. Once
the pairing is successful, you will hear an
audible tone from the speaker and the LED will
light up solid blue.
NOTE:
The BH65TWS will automatically
connect to a previously paired device if the
paired device’s Bluetooth radio is powered,
enabled and within reachable distance.
Connecting BH65TWS via Auxiliary Input
If you would like to use a device that is not
equipped with Bluetooth technology, simply
connect the included auxiliary 3.5mm cable from
your device to the Aux-In input at the side of the
BH65TWS. The speaker will automatically enter
auxiliary mode. While connected via Auxiliary,
the only controls that will function on the speaker
is the PLAY button and volume control. All other
functions are controlled from the connected
device.
Содержание BH65TWS
Страница 1: ......
