P
a
n
chromatic
Bell & Howell 606 Gaumont (H)
User Manual
14
www.Panchromatic.co.uk
Pilot Light
When threading in a darkened room, the condenser (Fig 1
4
)
can be partially withdrawn as indicated below so the light from
the projector lamp falls onto the lens and the sprocket
assembly.
The clutch (Fig 2
18
) must first be placed in the STOP position
before turning on the motor and lamp.
After threading the projector push the condenser fully home
and return the clutch (Fig 2
18
) to RUN.
Still Picture Device
If you wish to view a still picture, place the clutch (Fig 2
18
) in
the STOP position. This may be done at any time while the film
is running. (If the picture does not fully appear, press and turn
the hand setting knob, (Fig 2
15
), to obtain a full picture)
It will be necessary to adjust focus of the lens for the still
picture. Re-focus the lens when clutch is returned to RUN
position.
