Belkin Wireless G F5D7000, Руководство пользователя

Страница: 19 / 252

17
Using the Belkin Wireless Networking Utility
17
1
2
3
4
5
6
se
ct
io
n
security level (64- or 128-bit), the user will be asked to input a 10- or
26-character hex key. A hex key is a combination of letters, a–f, and
numbers, 0–9.
Wireless Protected Access (WPA)
is the new standard in
the wireless security. However, not all wireless cards and adapters
support this technology. Please check your wireless adapter’s user
manual to check if it supports WPA. Instead of a hex key, WPA uses
only passphrases, which are much easier to remember.
The following section, intended for the home, home office, and small
office user, presents a few different ways to maximize the security of
your wireless network.
At the time of publication, four Encryption Methods are available:
Encryption Methods:
Using the Belkin Wireless Networking Utility
WEP (Wired Equivalent Privacy)
Name 64-Bit Wired
Equivalent
Privacy 128-Bit
Encryption Wi-Fi Protected
Access Wi-Fi
Protected
Access 2
Acronym 64-bit WEP 128-bit WPA-TKIP/AES WPA2-AES
Security Good Better Best Best
Features Static keys Static keys Dynamic key
encryption
and mutual
authentication Dynamic key
encryption
and mutual
authentication
Encryption
keys based on
RC4 algorithm
(typically 40-bit
keys) Added security
over 64-bit
WEP using a
key length of
104 bits, plus
24 additional
bits of system-
generated data TKIP (Temporal
Key Integrity
Protocol) added
so that keys
are rotated and
encryption is
strengthened AES
(Advanced
Encryption
Standard)
does not
cause any
throughput
loss
WEP
is a common protocol that adds security to all Wi-Fi-compliant
wireless products. WEP gives wireless networks the equivalent level
of privacy protection as a comparable wired network.