79
150N Wireless Router
sections
table of contents
1
2
3
4
5
6
7
8
10
9
TRoUblEsHooTINg
Problem:
Setup Assistant cannot find my Router�
solution:
If the Setup Assistant is not able to find the Router during the installation process, please check the following items:
3
Ensure that you have a cable connected between the network
(Ethernet) port on the back of the computer and one of the “wired”
ports on the back of the Router�
Note:
The computer should NOT be connected to the port labeled “to
Modem” on the back of the Router�
4
Try shutting down and restarting your computer, then rerunning the
Setup Assistant�
If the Setup Assistant is still unable to find the Router, reference the section
titled “Manually Configuring Network Settings” for installation steps�
1
If the Setup Assistant is not able to find the Router during the
installation process, there may be third-party firewall software
installed on the computer attempting to access the Internet�
Examples of third-party firewall software are ZoneAlarm, BlackICE PC
Protection, McAfee Personal Firewall, and Norton Personal Firewall� If
you do have firewall software installed on your computer, please make
sure that you properly configure it� You can determine if the firewall
software is preventing Internet access by temporarily turning it off� If,
while the firewall is disabled, Internet access works properly, you will
need to change the firewall settings to function properly when it is
turned on� Please refer to the instructions provided by the publisher
of your firewall software for instructions on configuring the firewall to
allow Internet access�
2
Unplug power to the Router for 10 seconds, and then plug the power
back into the Router� Ensure that the Router’s “router” LED is on;
it should be solid GREEN� If not, check to make sure that the AC
adapter is connected to the Router and plugged into a wall outlet�
