12
GeTTInG sTaRTeD
Manually
If you choose not to use the included Setup CD for
adding additional computers or wireless devices, you
can manually add these items to your network .
1 . Locate the wireless-network-connections option
on your computer or wireless device .
2 . Select your Belkin Router from the list of available networks . You
can identify your Belkin Router by locating the network name
(SSID) from the card located underneath the foot of your Router .
3 . Enter your network password (located on
your network information card) .
Your wireless device will take a few moments to connect to your
network . If the connection is not made the first time, try this
process again . If you still have difficulty connecting to your network
after trying this process a few times, see the “Troubleshooting”
section in this manual for help with connecting to your network .
note: In some cases you may be prompted to select the
security type . It is printed on the card for your convenience .
Using the WPs button
1 . Start WPS Push Button Connection (WPS PBC) on your
computer or other Wi-Fi device that you would like to connect
wirelessly to your Router . Often there will be a button for this
purpose in software that came with the device, or a physical
“WPS,” “PBC,” or “Security” button on the device itself .
2 . Within two minutes, press the WPS button on your Router .
The WPS light (small light above WPS button) will blink green while
it listens for your Wi-Fi device . Once a connection is established, the
light will turn green and then go out . If a connection is not established,
the light will blink amber . You may repeat the process to try again .
You can repeat this process for each WPS-enabled
device you’d like to add to your network .
