Quick Installation Guide
ExpandView
™
Series
F1DV104
F1DV108
Belkin Corporation
501 West Walnut Street
Compton • CA • 90220 • USA
Tel: 310.898.1100
Fax: 310.898.1111
Belkin Components, Ltd.
Express Business Park
Shipton Way • Rushden • NN10 6GL
United Kingdom
Tel: +44 (0) 1933 35 2000
Fax: +44 (0) 1933 31 2000
Belkin Components B.V.
Starparc Building • Boeing Avenue 333
1119 PH Schiphol-Rijk • The Netherlands
Tel: +31 (0) 20 654 7300
Fax: +31 (0) 20 654 7349
Belkin, Ltd.
7 Bowen Crescent • West Gosford
NSW 2250 • Australia
Tel: +61 (0) 2 4372 8600
Fax: +61 (0) 2 4372 8603
Belkin Tech Support
US: 310.898.1100 ext. 2263
800.223.5546 ext. 2263
Europe: 00 800 223 55 460
Australia: 1800 666 040
P74184
© 2003 Belkin Corporation. All rights reserved. All trade names are
registered trademarks of respective manufacturers listed.
belkin.com
OmniView
Video Splitter
Broadcast and control video signals
on up to eight monitors
™
Connecting Monitors to the Splitter
1.
Make sure your monitors are powered off.
2.
Connect the HDDB15 male-type connector of your monitor to the
HDDB15 female-type connector output port on your Splitter.
3.
Turn ON your monitor.
Repeat steps 1-3 for each additional monitor you wish to connect.
You are now ready to use your Belkin OmniView ExpandView Series Video
Splitter. Please refer to your User Manual for additional information.
VGA 7
VGA 6
VGA 5
VGA 4
VGA 3
VGA 2
VGA 1
VGA IN
VIDEO IN
VIDEO OUT
VGA 8
P74184_F1DV104_108_QIG.qxd 3/10/03 3:33 PM Page 2
