Belkin OmniView® SMB KVM-over-IP Switch
10. From configuration page
, click the “Device Upgrade” tab.
11.
The following prompt will appear. Click the “…” button to locate the firmware file to be uploaded.
Страница 1: ...he KVM Switch 2 Connect a network cable to the LAN port on the KVM 3 Power up the KVM Wait until the LEDs stop blinking 4 Make a note of the MAC address of the KVM Switch on the label on the rear encl...
Страница 2: ...Belkin OmniView SMB KVM over IP Switch 10 From configuration page click the Device Upgrade tab 11 The following prompt will appear Click the button to locate the firmware file to be uploaded...
Страница 3: ...e file with the 64b file extension if you are using a Java enabled browser The upload process takes approximately 5 to 10 minutes For non Java enabled browsers 16 port version shown For Java enabled b...
Страница 4: ...Belkin OmniView SMB KVM over IP Switch 15 When the update is done the following screen will show...
