Step 2. Restart the computer.
Step 3. System will automatically detect for new hardware.
Step 4. Follow system’s setup instruction.
−
Software Installation
(for hotkey functions)
Step 1. Insert driver CD into CD-ROM or DVD drive.
Step 2. The installation program should run automatically. If not, double
click “setup.exe”
Step 3. The onscreen setup will guide you through rest of the installation
process.
Step 4. After the software installation is completed, you will be prompted to
restart your computer.
7.Trouble Shooting
When mouse does not work:
−
Please make sure the receiver’s connectors are plugged correctly into your
computer. Before you plug the PS/2 connector on receiver cable into PS/2
port, please do make sure your PC is Power Off.
−
Please make sure the batteries are loaded correctly in the mouse.
−
Please check battery life
−
Please press the connect button on top of the receiver, then use a sharp
