[Diagram of bottom of the router showing service card – can be
obtained from “Tested QIG 2011 07 14.pdf” provided]
Can’t find the card? The default network name and password are also printed on the foot of
the Router.
Use your computer, tablet, or smartphone to connect to the
wireless network shown on the network ID card.
[Diagram of connecting to SSID screenshot – needs creating, take
direction from “Tested QIG 2011 07 14.pdf” provided]
When requested, please enter the password (security key) provided
on the card.
Take a moment to look at the light on the front of the Router. If it
is solid blue, your Router was able to connect to the Internet
automatically.
[Image of front of the router with blue LED (needs creating)]
If not, please proceed to “Manually Set Up Your Internet
Connection” on page XX.
Using
the
WPS
Button
1)
Start
WPS
Push
Button
Connection
(WPS
PBC)
on
your
computer
or
other
Wi
‐
Fi
device
that
you
would
like
to
connect
wirelessly
to
your
Router.
Often
there
will
be
a
button
for
this
purpose
in
software
that
came
with
the
device,
or
a
physical
“WPS,”
“PBC,”
or
“Security”
button
on
the
device
itself.
2)
Within
two
minutes,
press
the
WPS
button
on
your
Router
and
hold
for
two
seconds.
The
WPS
light
(small
light
above
WPS
button)
will
blink
blue
while
it
listens
for
your
Wi
‐
Fi
device.
Once
a
connection
is
