TuneCast
®
Auto Universal
EN-4
sections
1
2
6
7
5
4
table of contents
3
seleCTInG An fM fReqUenCY
Manually selecting an fM frequency
If you want to use a specific frequency, you can manually select it on your TuneCast Auto .
1 .
Tune your stereo to a frequency between stations . The ideal frequency is one not
broadcasting a radio station’s signal .
2 .
Press the + or - button on your TuneCast Auto to select the same frequency .
3 .
To identify the best available frequencies in your area, you can also visit:
www .belkin .com/mybestfm .
storing and selecting a frequency
You can store two frequencies using the “m1” and “m2” buttons .
1 .
To store a frequency, select the desired frequency on your TuneCast Auto using the + or -
buttons . Press and hold the “m1” or “m2” preset button for two seconds . The “m1” or “m2”
icon will flash on the screen when the frequency is set .
2 .
To recall a preset frequency, press the “m1” or “m2” preset button . Your TuneCast Auto will
change to the preset frequency .
8820-00176ea_F8Z439ea.indb 4
26/08/2009 09:35:59
