Synchronizing your iPAQ series handheld:
Note: ActiveSync
®
Desktop Software from Compaq must be
installed on the PC to enable the synchronization function.
To support an ActiveSync connection using USB, your host
PC must be running Windows
®
98 or Windows 2000.
Microsoft
®
does not support an ActiveSync USB connection
under Windows 95 or Windows NT
®
.
With your iPaq turned on, plug the Sync Charger’s USB
connector into an available USB port on a desktop or
laptop computer.
Plug the other end of the Sync Charger into the
AutoSync connector at the base of the handheld.
Be sure that the word PUSH is facing up. The Sync
Charger will snap into place when securely attached.
If ActiveSync doesn't start synchronizing, select
Connection Settings from the ActiveSync File menu.
Click off the Allow USB Connection setting, and
click OK.
Go back to Connection Settings. Click on Allow USB
Connection and click OK. ActiveSync should begin to
synchronize your iPaq to your PC.
© 2001 Belkin Components. All rights reserved. All trade names
are registered trademarks of respective manufacturers listed.
Belkin Components, Ltd.
Unit 13 • Gatelodge Close • Round Spinney
Northampton • NN3 8RX • United Kingdom
Tel: +44 (0) 1604678300
Fax: +44 (0) 1604678330
Belkin Components
501 West Walnut Street
Compton • CA • 90220 • USA
Tel: 310.898.1100
Fax: 310.898.1111
Belkin Components, Ltd.
7 Bowen Cresent • West Gosford
NSW 2250 • Australia
Tel: +61 (2) 4372 8600
Fax: +61 (2) 4325 4277
P73796
A
B
C
A
B
C
iPAQ
™
Pocket PC
Sync Charging Cable
USB Cigarette Lighter Adapter
1
2
4
5
3
P73796_F8Q1000_man.qxd 5/23/02 2:00 PM Page 2
