3. Insert the CD into an optical drive on the computer.
4. Software installation begins automatically. Follow the on-screen
instructions to install the software.
If installation does not begin automatically, select
“Start > Run” from the “Start” menu on your desktop or notebook
computer. In the dialog box, enter “X:\Setup” where X is the letter of
your optical drive. Select “OK”. Follow the on-screen instructions to
complete the installation.
5. After the software is installed, disconnect the Pocket PC handheld from
the docking cradle or cable.
6. Reset the Pocket PC handheld for two seconds. This allows the device to
recognize the keyboard software. For more information on performing a
reset, refer to
the user guide included with your Pocket PC handheld.
Enabling the Driver
1. Turn on the Pocket PC Handheld.
2. Select “Start > Programs”.
8
Installation and Operation
(continued)