Troubleshooting
(continued)
39
Troubleshooting
38
PROBLEM
POSSIBLE CAUSE/REMEDY
No Audio
Check the RECORD settings in your
software to be sure that "Video and audio"
is selected. If only VIDEO is selected, then
only video will be captured.
No Audio
The Device settings may not be correct.
Select the "Belkin VideoBus II, Audio" as
the recording audio device. This is done in
the recording menu of most video editing
software.
No Video
Check RECORD settings to be sure that
"Video and audio" or "Video" is selected.
No Video
The Video Device may not be selected.
Select the "Belkin VideoBus II, Video" as
the video recording device.
No Video when
Be sure that S-Video cable is connected
using S-Video
to the camera and VideoBus II. Be sure that
S-Video is selected as the input source.
Capture loses
Follow the directions for turning on hard
frames or
drive DMA.
capture is choppy
Selecting Recording Sources in Movie Maker
Selecting Recording Input Device in Movie Maker
F5U208 user's manual 12/12/00 11:21 AM Page 38
