F5U103 Windows XP Installation
Page 2 of 2
10/29/2001
click on Properties.
2. Click on the Hardware Tab and then click on the Device Manager button.
3. Click on the plus sign next to Ports (COM & LPT). Under this heading you should see a Serial On
USB Port with a number.
4. Right click on the USB On Serial Port and choose Uninstall.
5. Click on the plus sign next to Universal Serial Bus Controllers and locate USB to Serial Converter.
6. Right click on USB to Serial Converter and choose Uninstall.
7. Close Device Manager and System Properties and Unplug the adapter from the computer.
8. Go to Start, Run and type c:\windows\inf, if this fails you can try c:\winnt\inf and click ok.
9. Scroll through the list of files and locate the files that start with OEM.
10. Windows creates an OEM and an OEM.PNF file for every device that you install to your system.
Try locating the highest number OEM, (for example oem6 and oem6.pnf). If oem6 was the highest
number, double click on the oem6 and scroll to the bottom and locate any information about Belkin or
Etek. If you find this information, close the file and delete this oem and the oem.pnf with the same
number. You can check the oem right below this number just in case. Then reboot your computer.
Un-installation is complete.
