2.6. Click Restart to complete the installation. This will restart your
computer.
The Belkin
USB
Serial Installer application will place 4 items on the
Extensions Folder (located in your hard drive's
System Folder),
namely: 1)
Belkin
USB
Serial driver
2)
Belkin USB Serial Shim
3) Belkin
USB
Serial Hal 4) Serial Shim Lib.
Note:
The installer will not run unless you have the
Mac OS USB version
1.0.1 (or later)
drivers installed.
If you have an
iMac
computer running Mac OS 8.1, the Mac' OS USB drivers
version 1.0.1 can be installed by installing the
iMac Update 1.0.
This update
can be downloaded from Apple's web site at www.apple.com.
If you have an
iMac
or a "blue and white" G3 running Mac OS 8.5\8.6, the Mac
OS USB drivers version 1.0.1 (or later) is already installed. You do not need to
install any further software.
Step 3. Connect the adapter to your USB port.
After restarting the computer, attach the Belkin USB Serial Adapter for
Macintosh to your Macintosh computer by connecting the adapter and the USB
device cable (Part # F3Ul33-06) to any built-in USB port on your Macintosh
computer or any USB hub. It is not necessary to turn off your Mac when
attaching the Belkin USB Serial Adapter.
Step 4. Installation Complete!
Your Belkin USB Serial Adapter for Macintosh" is now ready for use.
4
