N1 Wireless Desktop Card.doc
Page 7 of 35
1.5 The first in a series of progress-monitoring screens will let you know where
you are in the setup process. Click “Next”.
1.6 When the installer is done installing the software, you will see the following
screen. Click “Finish”.
1.7 You might see a screen similar to this one. This DOES NOT mean there is a
problem. Our software has been fully tested and is compatible with this
operating system. Select “Continue Anyway” and follow the on-screen
instructions.
2. Insert
Insert the Card into your Computer
2.1 After the software installation is finished, shut down the computer. Unplug
power cable and open computer’s case. Insert the Notebook Card to an
empty PCI slot. Connect the external antenna to the back of the Card. Turn
power on.