Belkin F5D6231, Руководство пользователя, Страница: 23 / 83

ALTERNATE SETUP METHOD
21
1.6 Before plugging the power cord into the Router, plug the cord into the
wall, then plug the cord into the Router’s power jack.
1.7 Verify that your modem is connected to the Router by checking the lights
on the front of the Router. The green light labeled “WAN” should be ON if
your modem is connected correctly to the Router. If it is not, recheck
your connections.
1.8 Verify that your computer is connected properly to the Router by
checking the lights labeled “LAN 1,2,3,4”. The light which corresponds to
the numbered port connected to your computer should be ON, if your
computer is connected properly. If it is not, recheck your connections.
Alternative Method Step 2: Set your Computer’s Network Settings to
Work with a DHCP Server
See the section in this manual called “Manually Configuring Network Settings”
for directions.
Mac or PC computer that was originally
connected to the cable or DSL modem
To power
adapter
Cable or
DSL modem
Supplied Ethernet
cable (to computer)
Existing network cable
(that came with modem)
P74122_F5D6231-4_man.qxd 11/6/02 1:04 PM Page 21