Belkin F5D6020, Руководство пользователя

Страница: 19 / 26

THE BELKIN WIRELESS NETWORK MONITOR UTILITY
17
4. Name the profile by typing in a name in the Profile Name field.
5. Type in the name of the wireless network in the Network Name (SSID) field.
6. If the network you are going to be connecting to uses an Access Point (this
is the most common configuration), leave the box next to “This Network uses
an Access Point” checked. If it is a peer-to-peer network that you are
creating a profile for, check that box.
7. If the network uses encryption, select the type of encryption (64-bit or
128-bit) by placing a checkmark next to the type you need.
8. Type in the network key for the network in the Network Key field. If the
network key is a hexadecimal key, check “Hex Key”. If your key is in the form
of a passphrase, check “Passphrase”. Check the number of the key that you
need to use. Most of the time, this is “1”.
Note: The network key and format
are determined by the network administrator. If you don’t have the key,
contact your administrator.
9. Click “Save” to save the profile.
10. Your profile will now appear in the profiles window. To use the profile, select
the profile by clicking on it, then press the “Use” button. The Utility will
switch to the Configuration view again. Your Card will now be connected to
the network specified in your profile.
Prioritizing your Profiles
You can change the priority of your profiles so the Utility will connect to the
first network in the profile priority list. This feature is useful if you are in an
area where you use more than one wireless network. Put simply, the profile at
the top of the list will be the first network that the Utility automatically
connects to. If the network in the top of the priority list is not available (you
are not near it) then the Utility will go to the next profile in the list, and so on.