23
Belkin
®
Universal 2nd Gen Secure DP/HDMI to DP/HDMI KVM Switch
TroublesHooTInG
seCTIons
Table of Contents
General
My computer does not boot when connected to the switch but works fine when
I connect my keyboard, video, and mouse directly to my computer.
Make sure that the DP-HDMI/USB KVM Cable Kit is connected tightly between
the Switch and the computer.
The switch does not turn on.
Ensure that the AC power cord is securely connected to both the AC inlet and
to the wall outlet.
Check that the power switch is in the ON position.
The switch makes rapid clicking noises and the port leds flash continuously
when turned on.
If the clicking noises continue, the unit may have been tampered with or
experienced severe impact.
noTe:
This Switch is equipped with active anti-tamper triggers. Any attempt
to open the enclosure will activate the anti-tamper triggers and render the unit
inoperable. If the unit’s enclosure appears disrupted or if all the port LEDs flash
continuously, please call Belkin Technical Support at
(800) 282-2355
.
seCTIons
