Connecting the Keyboard, Video, and Mouse
to the Console Ports on the Switch
Introduction
This sheet will guide you through the basic steps needed to install
the KVM Switch. If you have any problems during installation, please
refer to the User Manual.
You will need the following items to install the KVM Switch:
•
KVM Switch
•
One (each) keyboard, monitor, and mouse
•
One KVM cable kit per computer installed (included)
1
1.
Power down all computers.
2.
Connect your PS/2-type keyboard and mouse to the KEYBOARD and
MOUSE ports located on the side panels of your Switch.
P74712uk_F1DJ10xP-B_04.indd 3-4
12/11/04 10:26:58 am
