HARDWARE INSTALLATION
4
Connecting the USB Mouse
USB in Windows
®
98, Me, 2000, and XP
1.
Make sure your computer is turned on before installing the mouse.
2.
Check “Add/Remove Program” in your control panel for any
programs from your previous mouse. If you have anything
installed for your old mouse, please un-install before continuing.
3.
Connect the receiver to an available USB port on your computer.
4.
A New Hardware Wizard will start automatically.
NOTE:
In Windows Me and XP, the New Hardware Wizard will complete
the installation automatically. In Windows 98 and 2000, you will need
to go through the Hardware-Wizard process, clicking the appropriate
prompts as necessary. Windows 98 may also require you to insert your
Windows 98 Installation CD into your computer to complete the install.
5.
When your installation is complete, insert the batteries
into the mouse and the mouse should sync up with the
receiver automatically.
NOTE:
If the mouse does not sync up with the receiver
automatically, please see instructions titled “Synchronizing
your Mouse to your Receiver”.
6.
When your mouse is properly connected and functioning as a
standard mouse, you can start the software installation for the
extra button features.
