37
UsING YOUR BABY 200
You can press the button on the Baby unit to make the Parent unit
sound an alert beep to help you find it if it’s been misplaced. If the
Parent unit loudspeaker volume had been Muted (or set to volume
off), the volume level will be reset to the default setting of Level 3.
1. Press
on the Baby unit. The paging alert
will sound at the Parent unit.
2. To stop the alert, press any button on the Parent unit or press
the button again on the Baby unit. If no button is pressed
after 2 minutes then the alert will automatically stop.
Once the Mute Low sound threshold has been exceeded, baby sounds will be able to be
heard for a further six seconds even if they do not reach the Mute Low threshold.
List of tones
Find
Your Baby Monitor unit can produce various
tones. They have the following meaning:
Tone
Meaning
Single tone
Confirmation tone e.g. setting saved.
Double tone (fast)
Error tone e.g. max volume reached
when adjusting volume.
Double tone (slow)
User alert e.g. crying alert, paging alert etc.
Triple tone (fast)
System alert e.g. link lost, battery low etc.
User Alert tones can be silenced by pressing
any button on the Parent unit.
System Alerts can be silenced for a 5 minute period
by pressing any button on the Parent unit.
