����
Hookup and Installation
PureAV
Power
Console
10
Step 3
Remote AC Operation
This function allows you to turn your Power Console on and off via your
preamplifier or receiver equipped with a switched European power socket.
Note:
You cannot turn off the switched sockets on the Power Console
with the “Switched” button on the front of the unit when there is
any external power signal supplied to either the AC or DC remote
inputs.
To install the Remote AC Control Cable:
A.
Plug the C8 (Fig. 8 – female) end of the included Remote AC Control
Cable into the “Remote AC IN” socket located on the back of the Power
Console. (Fig. 3a)
B.
Press the “Remote” button on the front of the Power Console to turn
on the remote function. The LCD display should read “REMOTE ON”.
(Fig. 3b)
C.
Press the “Switched” button on the front of the Power Console to turn
off the switched sockets.
D.
Connect the Europlug (male) end of the Remote AC Control Cable into
a switched power socket on a preamplifier or receiver. When you turn
on the receiver or preamplifier, the sockets on the Power Console
that are programmed as “Switched” will be turned on immediately and
the “Switched/Delayed” sockets will come on after a delay set by the
“Delay Time Switch”.
Fig. 3a
Fig. 3b
