����
17
PureAV
Power
Console
Operation
Central LCD Control Panel
The PureAV Power Console PF40 is equipped with an advanced LCD
Control Panel. Most functions of the Power Console can be monitored
from this display.
A. PureFilter Indicator
– shows that the multiphase PureFilter Circuitry
is functioning properly.
B. Volt Meter
– displays the input voltage (the amount of voltage
coming from the AC wall socket to the Power Console).
C. Current Meter
– displays the output current (the amount of current
output [in Amps] from the Power Console’s socket banks).
D. Wiring
– indicates whether the AC socket to which the Power Console
is connected is wired properly, or cross-wired.
- Wiring OK.
- Live and neutral wires are reversed. See page 21 in the
“Troubleshooting” section for more information.
E. Earthed
– indicates if the Power Console is connected to a properly
earthed AC socket.
- Earth OK. The AC wall socket is properly earthed.
- Earth Fault. This indicates that the AC wall socket is NOT
properly earthed. See page 21 in the “Troubleshooting” section
for more information.
F. Switched Indicator
– shows whether the “Switched” sockets are
switched ON or OFF.
G. Timed Delay Indicator
– shows that the delayed sockets are switched
ON after a delay.
H. Remote Indicator
– shows whether the remote function is ON or OFF
(controlled with the “Remote” button).
I. Remote Button
– switches the Power Console to “Remote ON” status
when pressed. When in “Remote ON” status, the Power Console
sockets programmed as switched are turned ON/OFF via external
remote signal (see page 8).
J. Dimmer Button
– adjusts the brightness of the LCD Control Panel;
press it repeatedly to change the brightness level.
I
J
A
B
D
F
G
H
C
E
