Hookup and Installation
Pur
eA
V P
o
w
er C
ons
ole
10
Step 5
Connect your Pay-Per-View/Phone Line
Your PureAV Power Console comes equipped with Pay-Per-View/phone-line
protection with a built-in splitter. These are standard RJ11 phone jacks and
are labeled “Phone”.
A.
Connect one end of your telephone cable to the wall outlet to which you
normally connect your phone line. Connect the other end of your
telephone cable to the Power Console Phone jack labeled “IN”.
B.
Connect one end of the PureAV phone cable (included) to the Power
Console Phone jack labeled “OUT”. Connect the other end of this cable
to the Pay-Per-View phone jack on your DSS receiver.
C.
To connect a telephone - Connect one end of another phone cable to
the other Power Console Phone jack labeled “OUT”. Connect the other
end of this cable to the telephone you want to use.
Note:
We have included labels for the Phone IN and Phone OUT lines if
needed for better organization.
