37
N Wireless USB Network Adapter
sections
table of contents
1
2
3
4
5
INFORMATION
6
fCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY
off and on, the user is encouraged to try and correct the interference by
one or more of the following measures:
•
Reorient or relocate the receiving antenna .
•
Increase the distance between the equipment and the receiver .
•
Connect the equipment to an outlet on a circuit different from that
to which the receiver is connected .
•
Consult the dealer or an experienced radio/TV technician for help .
Modifications
The FCC requires the user to be notified that any changes or
modifications to this device that are not expressly approved by
Belkin International, Inc ., may void the user’s authority to operate
the equipment .
Industry Canada Statement
Operation is subject to the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including interference that
may cause undesired operation of the device .
We, Belkin International, Inc ., of 501 West Walnut Street, Compton, CA
90220, declare under our sole responsibility that the product,
F5D8053
,
to which this declaration relates, complies with Part 15 of the FCC
Rules . Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation .
Caution:
Exposure to Radio Frequency Radiation . The radiated output
power of this device is far below the FCC radio frequency exposure
limits . Nevertheless, the device shall be used in such a manner that
the potential for human contact during normal operation is minimized .
When connecting an external antenna to the device, the antenna shall
be placed in such a manner to minimize the potential for human contact
during normal operation . In order to avoid the possibility of exceeding
the FCC radio frequency exposure limits, human proximity to the
antenna shall not be less than 20cm (8 inches) during normal operation .
federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules . These
limits are designed to provide reasonable protection against harmful
interference in a residential installation .
This equipment generates, uses, and can radiate radio frequency
energy . If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment