Belintra Ubeflex, Инструкция по эксплуатации

Страница: 19 / 32

19
1
1
2
3
© BELINTRA, NV - UBFL/HL/EN/0005 - 09/2019
7. Mounting closed frame on telescopic runners for containers
WARNING
• Frame on telescopic runners up to maximum height of 1 m.
• Always in UBeFlex
®
set-up in combination with wall mount.
• Max. load: 25 kg.
• Only extract one frame at a time.
❱❱ ❱❱
Preparation
The frame on telescopic runners consists of 4 parts:
2 telescopic runners on mounting plates
(1) ,
the frame (2) and the upper shelf (3) .
❱❱ ❱❱
Mounting the runners
Mount the telescopic runners
(1) on the UBeFlex
®
posts and make sure to check if the left and right runners are mounted on the correct
side. Use the caps and turn-pins to secure the runners on the posts. First plug in the cap and use the turn-pin to secure the plate. Make
sure both plates are on the same height in the UBeFlex
®
column.
❱❱ ❱❱
Securing the frame
Once the telescopic runners are in place, secure the frame
(2) by simply clicking it onto the runners.
Slide open both the left and right runner and place the frame on top. Each runner has 2 clips which
hold the frame, align the clips of the runners with the gaps on the outside of the frame and push down.
You will hear the frame click into place.
❱❱ ❱❱
Mounting the upper shelf
After placing the frame you can mount the upper shelf
(3) . The shelf has 4 screws on the bottom which
fit into the frame. Place the upper shelf on top of the frame and align the screws with the holes in the
shelf. Secure the screws with the nuts.