BELINEA 101911, Руководство пользователя

Страница: 5 / 12

Belinea 10 19 11 - Operating Instructions - 4
ENGLISH
AUDIO DVI D-SUB AC IN
AUDIO DVI D-SUB AC IN
MENU DOWN UP AUTO POWER
Carefully lift the monitor out of the packaging and make
sure that all components are included (see fi g. 1).
Save the original box and packing material in case you
have to ship or transport the monitor.
To set up the device, you must fit the monitor base
together.
UNPACKING
±
To connect the monitor to your PC ...........................
1. Make sure that the PC and monitor are unplugged.
2. Connect the 15-pin signal cable to the monitor and the
PC (see fi g. 2a).
3. If you have a graphic card with a digital DVI-D con-
nector (24-pin socket), then connect one end of the
DVI-D cable (optional) to the DVI-D connector of your
monitor (see fi g. 2b), the other end to the computer.
CONNECTING
±
Connecting the audio cable ......................................
If your computer is equipped with an audio output port,
then connect one end of the sound cable to the audio input
connector of the monitor (
in fi g. 3) and the other end
to the Line-Out connector of the computer.
±
To connect the monitor to the power source ..........
Connect the separate power cable ( in fi g. 3) to the
monitor and a grounded outlet.
Figure 1. LCD Monitor
Power cord
Audio cable
VGA cable
DVI-D cable
(optional)
Figure 3. Connecting the monitor to the power source
Figure 2a. Connecting the monitor to the PC
Figure 2b. Connection via the DVI-D interface
Signal cable
AUDIO DVI D-SUB AC IN
2
1
1. First start your PC and then turn on your Belinea moni-
tor using the power switch (
in fi g. 4). The status
indicator ( in fi g. 4) should light up green.
2. Adjust the image to meet your requirements (see the
following sections “Basic Setup” and “Image settings
using the OSD menu”).
3. If there is no image displayed on the monitor, consult
the section “Troubleshooting”.
STARTUP