background image

ENGLISH

 

   Belinea 10 19 01 - Operating Instructions - 

3

• 

First,  unplug  the  power  cord  from  the  wall 
socket.

• 

If the LCD screen is extremely dirty, clean it with 
a moist cloth. Use only warm water and then wipe 
the monitor dry. Solvents or harsh cleaners can 
damage the housing. Clean the display surface 
only with a soft cloth, otherwise you may damage 
the display’s coating.

CARING FOR YOUR LCD MONITOR

•  If the monitor is only slightly dirty, clean it using 

a soft, dry and antistatic cloth.

• 

The LCD monitor’s screen surface is very sensi-
tive. Please avoid any contact with the surface 
(fi nger, pencil etc.) and be especially cautious 
during transportation since jolts and shocks can 
cause the screen to become scratched (always 
use the original packaging).

WALL MOUNTING

The Belinea monitor is shipped with the standard desktop confi guration. However, you can optionally mount the 
device on a wall or on a monitor swivel arm (optional accessory). Please follow the corresponding instructions 
(4-hole assembly with a spacing of 4 × 4 inches (100 × 100 mm) according to the international VESA FDMI stan-
dard).

IMPORTANT INFORMATION

Note on monitor placement

•  The setup location must not be extremely hot, 

cold, humid or dusty. Heat and cold can impair 
the functionality of the monitor. Humidity and dust 
can cause the monitor to fail.

•  Don’t place the monitor near heaters such as 

radiators or the like. Don’t expose the monitor to 
mechanical vibrations or jarring.

• 

Position the monitor so that no direct light or sun 
strikes the screen, which could cause refl ections 
that reduce the quality of the image.

Notes on power connection

 

Only use the power cord designated for use in 
your country.

 

The wall outlet should be within easy reach. Pull-
ing the power plug is the only way to disconnect 
the monitor from the power source.

•  This monitor is ENERGY STAR

®

-compatible. 

MAXDATA is an ENERGY STAR

®

 partner and 

guarantees that this device complies with the 
ENERGY STAR

®

 guidelines for optimizing power 

consumption.

Safety instructions for operation

 

The power cord must not be damaged. Do not 
place any objects on the power cord and make 
sure it does not have any knots. To unplug the 
cord, always pull on the plug and not on the cable 
itself.

•  Avoid covering the ventilation slots. Air circula-

tion is necessary to prevent the monitor from 
overheating. If the air circulation is restricted it 
could cause fi re or damage the monitor.

• 

Do not use any solvents to clean the monitor, as 
the housing could be damaged. For more infor-
mation about cleaning the monitor, please see 
“Caring for Your LCD Monitor”.

 

Never open the monitor housing yourself. There 
is a danger of electric shock and other hazards. 
The monitor may only be opened and serviced 
by qualifi ed professionals.

Note on resolution 

 

All resolutions provided by the graphics card that 
deviate form the physical resolution of the panel 
are adjusted by interpolation. This can impair the 
image quality.

Notes on ergonomics 

 

In order to relieve your eyes, neck and shoulder 
muscles when looking at the screen, we recom-
mend that you maintain a distance of 50 to 75 cm 
between the monitor and your eyes. In addition, 
you can relax your eyes by regularly focusing on 
an object at a distance of about 6 m. To achieve 
an ergonomic sitting position, your elbows, pelvis, 
knees and ankles should form a right angle.

Содержание 101901













Отзывы: