Belimed Protect
TM
PCD Starter Pack Instructions for Use
7. The Belimed Protect
TM
PCD Multi Block
Basic is now ready for use.
Loading Belimed Protect
TM
PCD Multi Block Basic into an automated washer
Picture 1. Locations of Belimed Protect
TM
PCD Multi Block Basic for initial performance assessment.
Initial assessment involves five consecutive cycles (alternatively one cycle with five Belimed Protect
TM
PCD Multi Block Basic). This establishes the baseline performance of the locally defined reprocessing
(depending on used detergents) and detects any locations within the washer where the cleaning is not
optimal with your defined process. Initial assessment is run on an empty load (without instruments).
a. Cycle 1 - place the Belimed Protect
TM
PCD Multi Block Basic in the washing chamber in
location 1 at the upper right front of the chamber as per Picture 1 and run a reprocessing
cycle.
b. Cycle 2 - place the Belimed Protect
TM
PCD Multi Block Basic in the washing chamber in
location 2 at the second level from the top between the right corner and the center of the
chamber (closer to the corner) as per Picture 1 and run a reprocessing cycle.
c. Cycle 3 - place the Belimed Protect
TM
PCD Multi Block Basic in the washing chamber in
location 3 in the center of the chamber under the spray arm hub as per Picture 1 and run a
reprocessing cycle.
