Page
13
/
22
e. At this time the panel heater indicator light should be on, the red neon on the equipment box
should also be on.
Digital Systems
If your spa is equipped with a digital electronic system, all necessary default settings are already set.
There is no further programming necessary.
Temperature Control: To set the desired temperature, press the Temperature (+) button for 2 seconds.
The temperature display starts to blink and you can now set the temperature with the (+) and (-) or
the Up- and Down buttons, respectively. If the desired temperature is reached, press SET to save.
Time Setting: Press the TIME Button for 2 seconds. The time display starts to blink and the timer
value can be chosen by using the (+) and (-) or the the Up- and Down buttons, respectively. If the
desired value is shown, press SET to save the changes.
Digital electronic systems possess a multitude of functions and settings, like the control of the filter-
ing systems. All necessary information can be found in the separately included instruction manual.
