43
S
ETTINGS
On the base:
Put the base to which you want to register the
handset in registration mode:
•
For the Twist 545, press on the
button on the base for a few seconds.
•
For other base stations, refer to their
user guides.
The green light blinks rapidly, the base is in
registration mode.
The new handset and the base are mutually
searching for each other. The registration
may take several seconds.
Once the handset is registered, the handset
automatically exits the registration mode and
lets you know the registration is done.
B
ASE
SETTINGS
Using a handset to put the base
in registration mode
This function enables you to put the base in
registration mode so you can register a new
handset. To do so, the handset to be
registered must be in registration mode (refer
to paragraph
Registering a new handset to
a base
, page
41
).
On the navigator key
, press or
until the
SETTINGS
screen is displayed,
press
OK
to confirm.
You can also set your base to the
registration mode using a handset
already registered by selecting the
Registration function in the menu
SETTINGS/ADVENCED SET/SET
BASE.
Select
ADVANCED SET.
using or .
Press
Valid.
.
Select
SET BASE
using or . Press
Valid.
.
Select
REGISTR.MODE
using or .
Press
Valid.
.
A screen prompts you to confirm the setting
of the base to the registration mode. Press
Yes
to enter the registration mode. The
indicator light on your base starts to quickly
blink green.
Your base will remain in registration mode for
about 1 minute.
Resetting the base
When you reset your base, all the base
parameters are reset to their initial values
(factory settings), your SMS are not deleted.
On the navigator key
, press or
until the
SETTINGS
screen is displayed,
press
OK
to confirm.
Select
ADVANCED SET.
. Press
Valid.
.
Select
SET BASE
. Press
Valid.
.
Select
RESET BASE
using or . Press
Valid.
.
You can also put the base in
registration mode by pressing the
base button
until the indicator
flashes.
Livre du D6O.book Page 43 Lundi, 14. mars 2005 10:57 10
