BELGACOM Twist 129, Руководство пользователя

Страница: 8 / 45

7
1.5 Installing the telephone
1 – Select an appropriate location for the base. Make sure that it is not near another
telephone or electrical appliance (computer, television, etc.) to avoid interference.
2 – Connect the mains adaptor plug to the modular socket located behind the base.
3- Connect the mains adaptor to the 230 V AC ,50 Hz socket.
4 – Connect the telephone lead to the modular socket located behind the base and the
other end to your telephone socket in the wall.
1.6 Installing the rechargeable batteries
1 – Open the battery compartment.
2- Insert the 2 rechargeable batteries (AAA NiMH/500
mA type) in the compartment, respecting the polarities.
3 – Close the battery compartment.
1.7 Battery charge:
Before you use the telephone you must charge the batteries for at least 24 hours (the
first time).
- Place the handset on the charge support. You will hear a confirmation signal.
- Leave the batteries to charge without interruption for at least 24 hours.
Remark: When the handset is charging, the icon will be permanently lit. There will
be nothing to indicate that the battery is fully charged in this position.