BelFone BF-TR8500, Руководство пользователя

Страница: 14 / 20

3. System Networking Function
The repeater can be connected to BelFone intelligent interconnection system
(SDC), and supports access to the system network for repeating DMR digital
voice and data services, so as to realize interconnected communication in the
networked mode.
Note: System networking is optional.
repeaters.
Peer:
An peer is a slave repeater, in a system, it is permitted to configure multiple slave
repeaters. Upon programming software, it is required to configure slave
repeaters, the backup master repeater and the current repeater’s IP address for
successful registration with the master repeater.
Authorization Code: Peers shall have consistent authorization codes with the
master repeater for successful registration. For an authorization code, it is allowed
to enter a maximum of 16 digits and letters from 0~9 and A~F; it can be null if
nothing is entered.
DHCP: When a peer is set to DHCP, the router will act as the DHCP server and
automatically assign an IP address to the peer.
(The router shall support DHCP, and the IP address assigned shall be within the
same network segment of the master repeater’s IP).
● When the current repeater is connected as a master repeater, it is required to
configure its IP, UDP port, gateway IP, network mask, NDS server IP, UDP port;
● When the current repeater is connected as a backup master repeater, it is
required to configure its IP, UDP port, gateway IP, network mask, DNS server IP,
UDP port and master repeater IP, master repeater UDP port;
● When the current repeater is connected as an peer, it is required to configure its
IP, UDP port, gateway IP, network mask, DNS server IP, UDP port and master
repeater IP, master repeater UDP port, backup master repeater IP, backup
master repeater UDP port.
Note: In one system, only one “master repeater” and one “backup master repeater” are
permitted; other repeaters shall be configured as “peers”.
The function is optional.
08